HVAC Site - Professional HVAC Contractors Forum banner

Thermostat fan

147 Views 3 Replies 3 Participants Last post by  eggs
We have a gas furnace that was tuned up last fall and a new thermostat installed. We like to have our fan running constantly, which it did all winter. Now that we have the AC on, the fan is not running continuously. I've done my research and know that for the fan to run continously, the fan should be put to the on postion. Here is where my issue lies. With the heat on, the fan runs continously with the fan in the auto position, which is NOT correct. When the ac is on, the fan will NOT run continously in either the on or auto position. I then took the thermostat cover off and noticed that the green wire is not attached at all, hard to see in the picture, but there is a green wire way back in there. One, how was the fan even running with this NOT connected? Two, how do I fix this so the fan will work correctly in the on and auto positions. I took the cover off the furnace and verified that all wires, including the green are connected at the furnace. Is the wiring in the picture connected correctly at the thermostat and do I need to just connect the green wire at the thermostat?


See less See more
1 - 2 of 4 Posts
Whoever did tune up and install thermostat is just one big hack. Where are you people find such idiots:))) Don’t tell me he was cheapest on the block:))
Turn power off at the furnace. At the thermostat take blue wire and move from B ( stands for BROWN not Blue) to G (green) Your blue wire is green now.
Go to furnace and put blue on G screw. Green wire no more in use. Just be spare if you ever buy thermostat with C terminal (c common) . Now wire that goes to outside to condenser needs 2 wires one put to yellow and yellow screw will have 2 wires on it . One from outside and one yellow wire from thermostat. Another wire from outside put on c screw (common) . If it’s more than 2 wires coming from outside then go outside and remove cover and see what color those 2 wires that connects outside unit. Then go inside and use those two wires one on yellow screw and one on c. Does not matter color of wires and no polarity so just use two of them .
easy peasy first graders can do it. To hard for handyidiots :))) calling themselves Hvac tune ups
See less See more
1 - 2 of 4 Posts