Indiana does not require any license for HVAC work. Where I live you have to register with the county, but that is it. So we end up with every Tom, Dick, and Harry working on fu...
Replies 9
try ebay or craigs list. The odds of someone having that same module is slim. I will keep my eyes open.
Replies 5
I have only done this until I could get back to run a new wire. I was just saying I have seen this done on alot of new installs because the install company was to cheap to run a...
Replies 13
I have added a ground to the liquid line of the ac unit before to avoid running a new wire back to the panel. My question is the neutral and ground are basicaly the same thing r...
Replies 13
check power on the heat speed stab on board. You should have 120 volts no longer than 20-30 seconds after burners light, Also check the heating speed wire and make sure it is ok...
Replies 8
I say you clean em once and then replace them. It's not like they cost a million dollars. An old timer told me once not to use sanding cloth only scotchbrite because cloth puts ...
Replies 20
The best thing to do is pound the wheel down then sand with cloth. You need to use a lubricant such as http://www.pbblaster.com/PB_Blaster.htmlthen use a puller. Do not hit the ...
Replies 92
