Well siad RoboTech
Replies 21
Seems to me from past experiences to be non compressable gases ( air ) Try recovering, evacuate well & weigh in new r-22. Both systems.
Replies 5
We were caught the same way, sales down showed quickly how much sevice was being subsidized. We've made the necessary adjustments & will keep an eye frequetly on each depart...
Replies 2
No other comment other than we let the cat out of the bag years ago. Now every HO or DIY thinks it is an easy no brainer. When it doesn't work call a pro, oops go online. Save b...
Replies 39
I agree but local code officials & law enforcement is extremely lax here. Code officials arbitrarily pick a point at random to enforce upon the legit, totally ignore infract...
Replies 20
Are you sure it is a Heat Pump? I have run into countless situations in my area where a heat pump was sold but when HO got wise that something wasn't right, turns out a straight...
Replies 20
We have tried most of the brands listed but we have come back to Mitsubishi for the reliability & availability of parts. You should go with heat pumps, you will regret it if...
Replies 13
Have gone to Simple Green in varying solutions. Biodegradable & easy on the skin.
Replies 14
I am still searching for the exact beginnings or source, I think it is a basic rule of thumb that is easier to use in the field than 320 cfm as shown on the physcometric chart. ...
Replies 30
Is the primary or any other limits manual reset? I would check this before buying a CB KISS - Keep It Simple...
Replies 8
In 30 years, the essential part is to sand the shaft as close to the hub as possible as good as you can all the way to the end -time well spent, then slick it up. I use a new pi...
Replies 92
Make & Model would be helpful, Carrier, Bryant, Payne & after 2006 Heil use an orifice at the liquid line to meter the outdoor unit in heat. Poor installation causes ...
Replies 3
People wonder why I drink. If it's not the HO's, it the hacks that work a little then think they can do it all. One of my boys ( actually highly trained young men ) brought in h...
Replies 88
Me too.:laughing: I did not intend to cause any prior grief, lately been busy trying to keep the business alive despite the hacks who have been laid off in the city & ...
Replies 9
If anyone with any amount of brain could understand any of the hazards of introducing any element, compound, gas, etc. containing oxygen into any environment containing oil, why...
Replies 112
That is why I earlier stated that CO2 is good for welding, subject to temp but not pressure.
Replies 112
What?, no CO2 involved? Best to Follow manufacturers instructions. Clover knows what I mean.
Replies 32
Gee whiz, what is your problem?
Replies 112
That's good HVAClover! No foul intended on the other post.
Replies 75
I don't have a prostrate issue yet, sorry for those that do. Manufactureres state to use nitrogen only. I didn't call you a hack, you referenced yourself to that era. It is...
Replies 112
