we would be out of jobs if over loads and safetys worked 100%all of the time.i can't tell you how many times i have been told "thats not possible"when in fact "anything is possi...
Replies 8
if the motor got real hot the lube in the felt pads is more than likley gone after the motor cools down then restarted the bearings are likley heating up and siezing just a thought
Replies 8
you should not be liable to replace compressor if it fails any company can get the waranty info thru the serial # there is a real problem in that unit .to many comp in a short ...
Replies 45
that unit will not last for very long.
Replies 45
that valve is cool a pre fab hot gas bypass with liquid inj and capacity control valve
Replies 7
if you had a bad burnout debris from the compressor bbq got caught in the distributor tubes causing a restriction by adding more refrigerant you stack the condenser raising your...
Replies 45
Suva 95 or 508b is a great replacement better than 13 almost as good as 503 i also work with blends for single stages to -150c i have had a lot of field time and class time wit...
Replies 4
